13
2.10
The transport wheel has 2 positions.
When down the wheel is used for moving the machine.
When up the machine is used for tilling.
2.11
Move the transport wheel to the up position by pulling the wheel down and moving it
to the up position locking slot (1).
(1)
CAUTION
The machine is shipped without fuel & oil therefore you
MUST
fill the engine with fuel
& oil before starting the engine.
Failure to do so will result in engine damage which will not be covered by warranty.
3.0
Move the throttle lever forward to the START position (1).
3.1
Gently pull the recoil starter handle until you feel resistance (2), then pull swiftly until
the engine starts.
3.2
Once the engine starts, slowly move the throttle lever back towards the MIN position
until the engine runs smoothly (3).
(1) (2) (3)
4. STARTING PROCEDURE
