7
Packet One Networks Malaysia Sdn Bhd
All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language, in any form by any means, without the permission of Packet One Networks Malaysia Sdn Bhd.
This document remains the property of Packet One Networks Malaysia Sdn Bhd. All information herein is confidential and cannot be copied
or used in any way detrimental to Packet One’s interest.
Phone Authentication Status
Once the Phone Cable (RJ-11) is connected to both your modem and phone, the blue phone
LED will light up. You can now access your subscribed P1 Voice service.
Step 2: Establish Phone Service Connection
Phone 1 Status
Phone 2 Status
Phone 1 & 2 Status
Blue
Orange Red
Purple
Steady ON
Blinking
Steady ON
Blinking
Phone service registered and ready
Phone 1 in use
Phone service registered and ready
Phone 2 in use
Steady ON
Blinking
Phone service registered and ready
Phone 1 & 2 in use
Phone LED indicates blue:
Phone service is ready
How to reset the modem?
Press the reset button for 5 seconds and then release. (Please do not use sharp object).
Reset button
