Instruction/Safety Manual – P3 Quadcharger PRO
Thank you for purchasing P-Squared Group’s P3 Quadcharger PRO.
Please read this Instruction/Safety Manual fully before charging any
batteries.
This product is to be used with the Phantom 3 family of Intelligent Flight
Batteries (not included).
The P3 Quadcharger PRO will allow you to charge up to four batteries
simultaneously, in the same amount of time traditional chargers will charge
one. The P3 Quadcharger PRO is also a convenient storage/carrying case.
Features:
P3 Quadcharger PRO (batteries not included) is a true rapid charger that
intelligently manages the charging current, voltage and temperature during
charging as well as being a convenient, lightweight storage and carrying
case.
In the box:
One P3 Quadcharger PRO
Instruction/Safety Manual
AC/DC power Supply
AC Power cord
DC Charging cable
Charging
1.Place P3 Quadcharger PRO on a hard, flat surface before starting charging
process. Insure nothing is restricting air flow in or around the P3
Quadcharger PRO or the Power Supply.
2.Securely plug your Phantom 3 batteries into the P3 Quadcharger PRO’s
charging slots.
3. Plug the DC charging cable into the P3 Quadcharger PRO.
4. Plug the DC charging cable into the AC/DC power supply.
5. Plug the AC power cable into the AC/DC power supply.
6. Plug the AC power cable into your AC power source (wall receptacle,
generator, etc.).
7. Turn the on/off power switch on the AC/DC power supply to the ON
position.
8. Batteries will automatically begin charging.
Batteries can be inserted or removed while charging.
Batteries will turn off when fully charged.
Note:
Charger will not charge any battery that the sensors indicate is too hot
or if conditions are too cold.
Note:
If a battery is already charged above 50% or below 15% when charging
begins you may need to turn the battery ON to initiate charging.
WARNING – NEVER CHARGE LEAKY, DAMAGED or SWOLLEN BATTERIES –
THIS CAN CAUSE A FIRE HAZARD!
This product is not a toy! Not for use by children under 14 years of age.
Never leave unattended while charging.
Disconnect charger when not charging.
Never charge on or near open flame.
Do not use in rain or moisture.
Do not drop strike or impale.
Do not disassemble or alter the unit. Contact P-Squared Group for service or
repair.
Do not use an attachment not recommended for the P3 Quadcharger PRO.
Caution
Do not operate this unit if it has been damaged in any way. Contact P-
Squared Group for repair.
Unplug from outlet before attempting to clean. To clean use a damp cloth
and then wipe dry.
Always follow manufacturers recommended charging procedures.
Please note
– P3 Quadcharger PRO is made with fire retardant ABS, but is
not considered “fireproof”.
Note: Make sure the cover to your P3 Quadcharger PRO is securely
fastened to the charger case before lifting or carrying.
P-Squared Group, LLC is not responsible for any damage to batteries that fall
out of your P3 Quadcharger PRO
