degrees.
Following is the screen of 24
℃
converted to be 75
℉
3
、
Then press“MODE”again, the heater enters into “SET TIMER (AUTO-OFF)” status
To press “+” or “-” button to set the heater operation time between 1 and 24 hours. This
function will activate once the timer icon stops blinking.
The heater will automatically turn-off when time runs out.
If it was set to be 10 hours, the heater will stop heating after 10 hours.
4
、
Then press “MODE” again, the heater enters into “SET TIMER (AUTO-ON)” status
To press “+” or “-” button to set the heater operation time between 1 and 24 hours. This
function will activate once the timer icon stops blinking.
The heater will automatically turn-on when time runs out.
If it was set to be 1 hour, the heater will start heating after 1 hour.
5
、
After all, press “MODE” again, the heater will be back to STEP 2 status.
6
、
Under STEP 2 status, the heater is heating with POWER III.
Now, press once
,
the heater will heat with POWER II;
OR press twice
,
the heater will heat with POWER I;
OR press three times, the heater will be POWER OFF.
Following are the status of Screen under Heating Power with III, II and I.
III II I
