2
MAN 9039267 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Introduction
Read these instructions thoroughly before putting the equipment into use. It provides
important information about the correct installation, operation, and maintenance of
the equipment. The manual is an important part of the equipment and should be
stored in an accessible place for later use.
Description of the equipment
The fan consists of the following parts:
A.
Fan housing made from galvanised steel.
B.
Slats
C.
Six blades
D.
Motor with pulley
Technical parameters and output
Model
QCHS-1250
Fan diameter
1,250 mm
Fan speed
439 rpm
Motor speed
1,400 rpm
Capacity
44,000 m
3
/hour
Total air pressure
56 Pa
Noise*
< 70 dB
Motor power
1,100 W
Voltage rating
380 V
Dimensions (H x W x D)
1,380 x 1,380 x 400 mm
*The noise measurement is made with the fan operating at its highest speed and at a
distance of 7 m from fan.
