3
MAN 9062494 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
User instructions - general use
Before using the jack, check to ensure that there is no oil leak or damaged or missing
parts.
The first time the jack is taken into use
1.
Open the release valve and set the accompanying handle (extension) into the pump
arm. To ensure the oil distributes, execute six whole pumping strokes with the handle.
2.
Close the release valve – the jack is now ready for use.
Lifting the vehicle
3.
Position the vehicle on a level, solid surface and ensure that the vehicle cannot move
by itself, as specified by the vehicle manufacturer.
4.
To ensure the safe lifting of the vehicle, position the floor jack under one of the
vehicle’s jacking points, at the same time ensure that the floor jack is at a 90° angle to
the vehicle (see the manufacturer’s instructions).
5.
Insert the handle in the release valve and close the release valve by turning it clockwise
until it cannot turn any further.
6.
Insert the handle in the pumping arm and pump with the handle until the jack saddle
comes into contact with the vehicle.
7.
Check that the jack is positioned correctly.
8.
Continue to pump with the handle until the car is raised to the desired height.
General
warning
Nominal
capacity
2.5 tonnes
Read the user
manual before use
Never work
under the
vehicle when
using the jack.
Only work
under the
vehicle
when it is
safely
supported
on approved
j k d
Use the jack on a
level surface.
Use chock
blocks to
secure the
wheels.
Do not exceed
the capacity.
Warning about
injury to hands.
