5
MAN 9058322 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
DK 6600 Vejen, Denmark
E-mail: [email protected]
In the case of overheating, the unit has a
thermal cut-out that switches off the
heating element and the pump. If the
thermal-cut out has tripped, the reset
button must be activated manually. It is
positioned under the bottom behind the
screw cover of the unit.
The thermostat is factory set to 15°C.
This setting can be changed from
0–40°C. There is a plastic screw in the
end cover that can be unscrewed. In the
hole there is a screw that can be turned
using a screwdriver to change the
temperature. It is recommended that the
value in Denmark is set to approximately
8–10°C.
Venting screw position
