© P.L. Light Systems, 4800 Hinan Drive, Beamsville, Ontario, Canada, L0R 1B1 T: 905.563.4133 Toll Free: 1.800.263.0213 www.pllight.com
NXT_LP_Install_ Alpha_Beta_Br
ack
et
Mt_9.19
PAGE
2 of 4
ATTENTION: Install in accordance with national and local building and electrical codes.
!
!
7
Level Fixture
• Use integrated level on back of the housing to adjust
the light fixture. Fixture is level when spirit level
bubble is centered.
6
Hang Fixture
• Raise fixture to ceiling at a 45° angle to the mounting
structure, then rotate it parallel so that both brackets
are aligned above mounting structure.
• Lower fixture so that both brackets securely hook
over top of mounting structure.
Alpha / Beta Reflector: Bracket Mount
Installation Instructions
NXT-LP
8
Complete Electrical Connection
• Connect power cord from power supply to fixture.
level
!
ATTENTION
Always allow ample space above the
installed luminaire to ensure good airflow.
This will prevent an excessive build-up of
heat between the luminaire and the ceiling
which could result in damage to the
electronics components and/or lamp.
