P.I.T. PSW750-T, Operation Manual

Page: 4 / 17

Screw Pump
3
► Unauthorized modifi cations to the pump
design, as well as the use of parts that
have not passed the tests and are not
approved for use by the manufacturer,
are prohibited.
► It is forbidden to pump explosive, fl am-
mable, corrosive or health hazardous
substances, as well as water containing
mechanical impurities in the form of
sand, stones, etc.
► The pump is not suitable for pumping
chlorine-containing water in swimming
pools.
►
Not recommended for pumping drink-
ing water.
► When starting the pump for the first
time, ensure that it is completely fi lled
with water. it is not allowed to operate
the pump without water consumption.
► Air entering the suction line is not al-
lowed.
► To avoid freezing, the water must be
completely drained from the pump and
from the suction and pressure lines.
Description of product and ser-
vices
Product and Service Description Read all
safety directions and instructions.
Failure to follow the safety instructions
and instructions can result in electric
shock, fi re and / or serious injury.
Please observe the illustrations at the begin-
ning of the operating instructions
Intended use
The pump is designed for pumping clean
water from wells, wells, reservoirs and reser-
voirs, for automatic water supply systems at
home, for irrigation of gardens and vegetable
gardens.
The product is not intended for continuous
operation (continuous pumping mode).
Pump device
The general view of the tool is presented on
the page with illustrations.
1.Electric pump
2.Outlet connection
3.Cable lugs
4.Power cord
Technical data
Model PSW750-T
Rated voltage 220 V~/50 Hz
Rated power 750 W
Performance 1.8 m³/h
Lifting height 100 m
The weight 12 Kg
Contents of delivery
Screw pump 1 pc
Instruction manual 1 pc
Outlet fi tting 1 pc
Note
In text and numbers, may technical errors
and mistakes were made Since the product is
constantly being improved, P.I.T. reserves the
right to make changes to the specifications
and equipment of the product specifi ed here
without prior notice.
Preparation for work
To put the electric pump into operation,
you must:
► Connect the socket to the mains, taking
into account the safety requirements
set forth above;
► Make sure that there is no mechanical
damage to the electric power cable;
► Connect the electric pump using adapt-
ers with a pressure pipe or a hose with
a diameter of at least 1 inch (see. Elec-
tric pump installation diagram)