P.I.T. PSB20H-10B, User Manual, Page: 7 / 25

Cordless Impact Drill
6
nal short circuit can occur and the battery
can burn, smoke, explode or overheat.
► The battery is supplied partially
charged. To ensure full battery capaci-
ty, completely charge the battery in the
battery charger before using for the
fi rst time.
► Read the operating instructions of the
battery charger.
► Adjust the gear switch only when the
machine is at a complete stop.
► Always push the gear selector and turn
the operating mode selector switch
through to the stop. Otherwise, the ma-
chine can become damaged.
Product Description and Specifi-
cations
Read all safety warnings and all
instructions.
Failure to follow the
warnings and instructions may result
in electric shock, fi re and/or serious
injury.
Intended Use
The machine is intended for driving in and
loosening screws as well as for drilling in
wood, metal, ceramics and plastic. Impact
drills are additionally intended for impact drill-
ing in bricks, brickwork and masonry.
The light of this power tool is intended to illu-
minate the power tool’s direct area of working
operation and is not suitable for household
room illumination.
Product Features
The numbering of the product features refers
to the illustration of the machine on the graph-
ics page.
(1) Tool holder
(2) Keyless chuck
(3) Torque presetting ring
(4) Gear selector switch
(5) On/off switch
(6) Rotational direction switch
(7) Work light
(8) Battery release button
(9) Battery
(10) Handle (insulated gripping surface)
(11) Additional handle (PSB20H-13B)
Technical Data
Model PSB20H-10B
7PMUBHF
DC 20V
$IVDLTJ[F
φ0.8mm-φ10mm
4QFFE
0-450/0-1450r/min
.BYUPSRVF
38N.m
5PSRVFTFUUJOH
20+3
Model PSB20H-10B
8FJHIU
1kg
Compatible battery
(availability may vary)
PH20-2.0 (2Аh)
PH20-3.0 (3Аh)
PH20-4.0 (4Аh)
PH20-5.0 (5Аh)
PH20-6.0 (6Аh)
Compatible charger
(availability varies by
package)
PH20-2.4A
PH20-3.0A
Model PSB20H-13B
7PMUBHF
DC 20V
$IVDLTJ[F
φ1.5mm-13mm
4QFFE
0-450/0-1850r/min
.BYUPSRVF
75N.m
5PSRVFTFUUJOH
20+3
8FJHIU
1kg
Compatible battery
(availability may vary)
PH20-2.0 (2Аh)
PH20-3.0 (3Аh)
PH20-4.0 (4Аh)
PH20-5.0 (5Аh)
PH20-6.0 (6Аh)
Compatible charger
(availability varies by
package)
PH20-2.4A
PH20-3.0A
Note
Since the product is constantly being
improved, P.I.T. reserves the right to make
changes to the specifications and product
specifications specified here without prior
notice.
Assembly
Battery Charging
Note: The battery supplied is partially
charged. To ensure full capacity of the battery,
completely charge the battery in the battery
charger before using your power tool for the
fi rst time.
The lithium ion battery can be charged at any
time without reducing its service life. Interrupt-
ing the charging procedure does not damage
the battery.
The lithium-ion battery is protected against
deep discharging. When the battery is empty,
the machine is switched off by means of a
protective circuit: The inserted tool no longer
rotates.
► Do not continue to press the On/Off
switch after the machine has been au-
tomatically switched off . The battery can
be damaged.