Impact Drill
7
► When using power tools outdoor, you must
install fault current (Fl) protection switch on
the power tool.
► Appropriate detector shall be used to fi nd
the location of hidden power wires. Or you
should obtain relevant information from
local power supply unit. Drilling electric
wires will cause fire and electric shock.
Damaged gas pipe will cause exploration.
If water pipes are punctured, damage will
be caused to property.
► In case a accessory installed on the power
tool is clamped, you shall shut down the
power tool and stay calm. At that time, the
power tool will produce extremely high
reactive torque thus resulting in return
stroke. The accessory installed on the
power tool are likely to be clamped, for
example: hypercharge of power tool or
skewing of accessory installed on the pow-
er tool during work.
► If hidden electric wires or power lines of
the power tool itself might be cut off during
work, you must hold the insulated handle
to operate the power tool. When the power
tool is in touch with a charged line, the
metal parts on the power tool will conduct
electricity and may cause the operator to
get an electric shock.
► During work, you must tightly hold the
power tool and ensure you stand firmly.
You should hold the power tool with your
hands.
► When operating and using the power tool,
you can only hold switch position of the
main handle rather than other parts.
► Avoid stopping an power tool motor when
loaded.
► Never remove any chips or fragments with
your power tool’s motor running.
► When working, follow the position of the
power supply cable. Avoid winding it
around your legs or arms.
► Use only sharp drill bits without defects - it
will make working with the power tool easi-
er.
► The modifi cation of the drill bits design and
the use of removable orifices and acces-
sories not envisaged for this power tool is
strictly forbidden.
► Do not apply excessive pressure when op-
erating the power tool - it can jam the drill
bit and overload the engine.
► Do not allow drill bits to jam in the mate-
rial processed. If this occurs, do not try to
release them by means of the power tool
engine. This can put the power tool out of
order.
► Striking out drill bits jammed in the mate-
rial processed with a hammer or other ob-
jects is strictly forbidden - metal fragments
can hurt both the operator and the people
nearby.
► Avoid overheating your power tool, when
using it for a long time.
Product Description and Specifi-
cations
Read all safety warnings and all
instructions.
Failure to follow the
warnings and instructions may result
in electric shock, fi re and/or serious injury.
Intended Use
The power tool is intended for impact drilling
in brick, concrete and stone, as well as for
drilling in wood, metal, ceramic and plastic.
Tools with electronic control and right/ left
rotation are also suitable for screwdriving and
thread cutting.
Technical Data
Model
PSB16-C
3BUFE7PMUBHF
220 V~/50 Hz
3BUFE1PXFS
1050 W
3BUFEOPMPBETQFFE
0-900/2500 r/min
$IVDLEJBNFUFS
Ø16 mm(5/8")
Weight
4 kg
Contents of delivery
Impact drill 1pc
Side grip
1pc
Chuck key
1pc
Depth gauge
1pc
Instruction manual
1pc
Note
Since the product is constantly being im-
proved, P.I.T. reserves the right to make
changes to the specifications and product
specifi cations specifi ed here without prior no-
tice.
Product Features
The numbering of the components shown re-
fers to the representation of the power tool on
the graphic pages.
1
Gear rim chuck
2
Additional handle
3
Depth stop
4
Step speed selector switch
5
“Impact/ drill” switch
6
Ventilation slots
7
Rotational direction switch
8
Speed selector thumbwheel
https://tm.by
Интернет
-
магазин
