P.I.T. PROFESSIONAL PSB20H-10C Operation Manual Download Page 5

Cordless Impact Drill

4

switch is dangerous and must be repaired.

 

Disconnect the plug from the power 
source and/or the battery pack from the 
power tool before making any adjust-
ments, changing accessories, or stor-
ing power tools. 

Such preventive safety 

measures reduce the risk of starting the 
power tool accidentally.

 

Store idle power tools out of the reach 
of children and do not allow persons 
unfamiliar with the power tool or these 
instructions to operate the power tool.

 

Power tools are dangerous in the hands of 
untrained users.

 

Maintain power tools. Check for mis-
alignment or binding of moving parts, 
breakage of parts and any other con-
dition that may affect the power tool’s 
operation. If damaged, have the power 
tool repaired before use.

 Many accidents 

are caused by poorly maintained power 
tools.

 

The appliance is not intended for use by 
persons (including children) with reduced 
physical, sensory or mental capabilities, or 
lack of experience or knowledge, unless 
they have been supervised or instructed 
in the use of the appliance by a person re-
sponsible for their safety.

 

Keep cutting tools sharp and clean.

 

Properly maintained cutting tools with 
sharp cutting edges are less likely to bind 
and are easier to control.

 

Use the power tool, accessories and 
tool bits etc. in accordance with these 
instructions, taking into account the 
working conditions and the work to be 
performed. 

Use of the power tool for oper-

ations different from those intended could 

result in a hazardous situation.

 

Keep handles and gripping surfaces dry 
and clean and free from oil or grease.

 

Slippery handles and gripping surfaces 
prevent safe handling of the tool and do 
not allow reliable control in unforeseen sit-
uations.

Battery tool use and care

► The battery is not fully charged at the time 

of delivery. To ensure full battery perfor-

mance, fully charge the battery before first 

use.

► Only use the battery in combination with 

your P.I.T. This is the only way to prevent 
dangerous battery overload.

 

Recharge only with the charger speci-

fied by the manufacturer.

 A charger that 

is suitable for one type of battery pack may 

create a risk of fire when used with anoth

-

er battery pack.

 

Use power tools only with specifically 
designated battery packs.

 Use of any 

other battery packs may create a risk of 

injury and fire.

 

Important safety instructions for working 
with the battery pack.

 

WARNING: Use only original P.I.T. Use of 
batteries not manufactured by P.I.T. or bat-

teries that have been modified may result 

in battery explosion, fire, personal injury or 

property damage. This will also automat-
ically void the P.I.T. on the P.I.T. tool and 
charger.

 

Before using the battery pack, read all in-
structions and warning labels on the char-
ger, battery pack, and tool powered by the 
battery pack.

 

Do not disassemble the battery 

pack.

 

Do not drop or hit the battery pack.

 

Do not use a damaged battery pack

 

I f   t h e   o p e r a t i n g   t i m e   o f   t h e   b a t t e r y 

pack is significantly shortened, stop using 

it immediately. Otherwise, the unit may 
overheat, resulting in burns and even an 
explosion.

 

If electrolyte gets into your eyes, rinse 
them with plenty of clean water and seek 
medical attention immediately. This can 
lead to vision loss.

 

Do not short the contacts of the bat-
tery pack with each other:

(1) Do not touch the contacts with any con-
ductive objects.
(2) Do not store the battery pack in a con-
tainer with other metal objects such as nails, 
coins, etc.
(3) Do not expose the battery pack to water or 
rain. Shorting the contacts of the battery pack 
together can cause high current, overheating, 
possible burns, and even breakage of the 
pack.

 

Do not store the tool and battery pack 
where the temperature can reach or ex-
ceed 50 °C (122 °F).

 

Do not throw the battery pack into a fire, 
even if it is severely damaged or com-
pletely out of order. The battery pack may 

explode if exposed to fire.

 

Gas may be released if the battery 
is damaged or misused. Provide fresh air 
and if you have any complaints, consult a 
doctor. Gases can cause respiratory irrita-

Summary of Contents for PROFESSIONAL PSB20H-10C
























Reviews: