P.I.T. PMT20H-035A, User Manual

Page: 5 / 24

Cordless multi-function tool
4
op due to the materials heating up when
being scraped.
► Take particular care when handling
scrapers and blades.
The application
tools are very sharp. Danger of injury.
► Secure the workpiece. A workpiece
clamped with clamping devices or in a vice
is held more secure than by hand.
► In case of damage and improper use
of the battery, vapours may be emitted.
Ensure the area is well-ventilated and seek
medical attention should you experience
any adverse eff ects. The vapours may irri-
tate the respiratory system.
► Do not open the battery. There is a risk of
short-circuiting.
► The battery can be damaged by pointed
objects such as nails or screwdrivers or
by force applied externally.
An internal
short circuit may occur, causing the battery
to burn, smoke, explode or overheat.
► Only use the battery with products from
the manufacturer.
This is the only way in
which you can protect the battery against
dangerous overload.
Protect the battery against heat,
e.g. against continuous intense sunlight,
fi re, water, and moisture.
There is a risk of
explosion.
Product Description and Specifi-
cations
Read all safety warnings and all
instructions.
Failure to follow the
warnings and instructions may result
in electric shock, fi re and/or serious injury.
Intended Use
The power tool is intended for sawing and
cutting woodbased materials, plastic, plaster-
board, non-ferrous metals and mounting ele-
ments (e.g. non-hardened nails, clamps). It is
also suitable for working on soft wall tiles and
for dry sanding and scraping of small areas.
It is ideal for working close to edges and fl ush
with surfaces. The power tool must only be
operated using Bosch accessories.
Technical Data
Model PMT20H-035A
Voltage DC 20V
No-load speed 5000-19000/min
Oscillation angle on
left/right
3.2°
Model PMT20H-035A
Совместимая акку-
муляторная батарея
(наличие зависит от
комплекта постав-
ки
）
PH20-2.0 (2Ач)
PH20-3.0 (3Ач)
PH20-4.0 (4Ач)
PH20-5.0 (5Ач)
PH20-6.0 (6Ач)
С о вм е с т и м о е з а -
рядное устройство
(наличие зависит от
комплекта поставки)
PH20-2.4A
PH20-3.0A
Note
Since the product is constantly being im-
proved, P.I.T. reserves the right to make
changes to the specifications and product
specifi cations specifi ed here without prior no-
tice.
Product Features
The numbering of the product features refers
to the illustration of the machine on the graph-
ics page.
(1) On/off switch
(2) Battery release button
(3) Battery
(4) Ventilation slots
(5) Orbital stroke rate preselection thumb-
wheel
(6) Battery charge indicator
(7) Tool holder
(8) Handle (insulated gripping surface)
(9) Plunge cut saw blade
(10) Sanding plate
(11) Washer
(12) Clamping bolt
(13) Hex key
(14) Sanding sheet
Fitting
► Remove the battery from the power tool
before carrying out work on the power
tool (e.g. maintenance, changing tool,
etc.). The battery should also be re-
moved for transport and storage.
There
is risk of injury from unintentionally press-
ing the on/off switch.
Charging the battery
► Use only the chargers listed in the
technical data.
Only these chargers are
matched to the lithium-ion battery of your
power tool.
Note: The battery is supplied partially
charged. To ensure full battery capacity, fully
charge the battery in the charger before using
your power tool for the fi rst time.
The lithium-ion battery can be charged at any
time without reducing its service life. Interrupt-