P.I.T. PLM37-C User Manual Download Page 2

ELECTRIC LAWN MOWER

1. Before cleaning, servicing, repairing, or if the power cord is tangled or damaged, be sure to unplug the power 
cord.
2. Each time, before using the mower, carefully read the instructions for use and maintenance in order to ensure 
the correct preparation of the machine for use and the correct application.
3. It is forbidden to work with the lawn mower to children, as well as to persons who are not familiar with this 
instruction. Follow the rules set by your local authority regarding age restrictions.
4. Unauthorized persons, especially children or animals, must not be within a radius of 6 meters from the mow-
er's place of work.
5. The operator is responsible for damage or injury to unauthorized persons who are in the area of   use of the 
mower.
6. Wear sturdy shoes and long tight pants. Do not wear sandals or other open shoes.
7. Carefully inspect the area where you will work, and remove all objects that could cause you damage or 
damage the mower (stones, metal objects, pieces of wood, etc.).
8. Do not use the electric lawnmower during rain or in high humidity. It is not recommended to use the mower if 
the grass is wet.
9. Every time before work, check for damage to all electrical connections and the extension cable, as well as the 
fastening of all rotating parts of the mower.
1O. Before use, check if the knife, knife holder, cutting edges of the knife are damaged. If the knife is damaged, 
it must be replaced. When replacing, use only original spare parts. Tighten all fasteners that are loose.
11. When operating the machine, the operator’s feet must be at a safe distance from the knife.
12. The control handle provides a safe distance for the operator.
13. Do not leave the machine connected to the network unattended.
14. Your electric lawnmower is equipped with a knife brake, and the rotation of the knife stops within 3 seconds 
after turning off the engine. For safety reasons, do not approach the knife until it stops completely.
15. If a foreign object enters the rotation zone of the knife, turn off the power and unplug the machine. Check 
the knife for possible damage.
16. Turn off the engine and unplug the cord before transporting the mower, or when moving to a new job.
17. Work in daylight or under appropriate artificial lighting.
18. When working on slopes, move along the slope, not up or down the slope.
19. Be especially careful when changing direction on slopes.
20. Be especially careful when turning the car and driving “towards you”.
21. It is forbidden to use the mower without protective devices - a deflector or grass catcher, or if they are 
damaged.
22. When starting the engine, keep a safe distance between your legs and the cutting knife.
23. Before servicing or cleaning robots, stop the engine and unplug the cable from the outlet.
24. Before removing the grass catcher, be sure to turn off the engine and wait for the knife to stop completely.
25. When starting the engine, do not stand behind the grass discharge hole.
26. If strong vibration occurs, stop the engine, unplug the cable from the mains, carefully inspect the machine. 
Strong vibration is most often the result of any damage.
27. When servicing the knife or in the vicinity, observe the appropriate safety precautions. The use of protective 
gloves is mandatory.
28. Do not use sharp objects to clean the cabinet. Before cleaning, be sure to unplug the mower.
29. The basis of safety is the timely identification and replacement of damaged parts. Use only original spare 
parts recommended by the manufacturer.
30. Periodically monitor the state of attachment of the knife.
31. Regularly monitor the condition of the mowing knife. Knife replacement, as well as lubrication and adjust-
ment work, must be performed by service center specialists.
32. Make sure that the knife is sharp, if necessary, correct or sharpen it, observing the balance.
33. Store the power tool in a dry place out of the reach of children.

GENERAL SAFETY PRECAUTIONS

1

Summary of Contents for PLM37-C























Reviews: