P.I.T. PKE405-C7, Operation Manual

Page: 11 / 29

Electric Chain Saw
10
guide, never a steel tool.
– Remove the saw guide.
– Clean dirt and oil from the guide groove of
the guide bar with a suitable tool.
Retensioning the saw chain
– Loosen the fastening bolt by approxi-
mately one turn.
– Lift the tip of the saw bar slightly.
– Tighten the Chain Adjustment Ring for
chain tension until the chain lies on the un-
derside of the saw rail.
Lubricating chain wheel
The bearing of the chain wheel should be
regularly lubricated at the front-end of the rail.
About 1× in a week in case of intensive use.
– Clean the lubrication hole.
– Apply little multi purpose grease in the lu-
brication hole, while moving the chain with
hand.
Sharpening the saw chain
DANGER!
Danger of death!
A worn or improperly sharpened chain can
cause rebounds. Severe or even fatal injuries
can be the result!
Note:
Special tools are required to sharpen the saw
chain; these guarantee that the cutting of the
chain occurs at the correct angle and the cor-
rect depth. We recommend that you have the
saw chain sharpened by a professional.
Maintenance and Service
Maintenance and Cleaning
►
Pull the plug out of the socket before
carrying out any work on the power
tool.
► To ensure safe and efficient operation,
always keep the power tool and the
ventilation slots clean.
In order to avoid safety hazards, if the power
supply cord needs to be replaced, this must
be done by P.I.T. or by an after-sales service
centre that is authorised to repair P.I.T. power
tools.
Service
►
Have your power tool repaired only by
qualified personnel and only with origi
-
nal replacement parts. This ensures the
safety of the power tool.
The list of authorized service centers can be
viewed on the official website of P.I.T. by the
link: https://pittools.ru/servises/
Storage and transportation
The saw should be stored in closed rooms
with natural ventilation at temperatures from 0
to + 40 ° С and relative humidity up to + 80%.
The presence of vapors of acids, alkalis and
other aggressive impurities in the air is not
allowed.
Products can be transported by any type of
closed transport in the manufacturer’s pack
-
aging or without it, while preserving the prod-
uct from mechanical damage, atmospheric
precipitation.
Dispose of waste
Damaged power tools, batteries, acces-
sories and waste packaging materials
must be recycled and reused in an envi-
ronmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion serial number
The date of manufacture of the product is
encoded in the serial number printed on the
body of the tool. The first 2 digits indicate the
year of issue, the next 2 digits indicate the
month.
TERMS OF WARRANTY SERVICE
To customers (users) of warranty service:
1. This warranty certificate is the only docu-
ment that confirms your right to free warranty
service. If this proof is not presented, no
claims will be accepted. Warranty certificates
cannot be recovered if lost or damaged.
2. It is required to provide a valid and legal
document for purchasing the product. The
document must have the name or seal of the
sales company; at the same time, state the
full model name of the purchased P.I.T. prod-
uct, the serial number on the nameplate of the
fuselage, and the date of purchase, and the
required warranty. The whole machine and its
accessories.
The warranty period:
1. The warranty period of the product is 12
months from the date of sale. During the
warranty period, the service department
will eliminate manufacturing defects free of
charge and replace the parts that fail due to
the manufacturer’s fault. In warranty repair, an
equivalent operable product is not provided.
Replaceable parts become the property of the
service provider.