P.I.T. PBH26-C5, Operation Manual

Page: 6 / 21

Electric Hammer Drill
5
in concrete, brick and stone. It is also suitable
for drilling without impact in wood(PBH24-C1),
metal, ceramic and plastic. Machines with
electronic control and right/left rotation are
also suitable for screwdriving.
Product Features
The numbering of the product features refers
to the illustration of the machine on the graph-
ics page.
1. SDS-plus quick change chuck
2. SDS-plus tool holder
3. Dust protection cap
4. Locking sleeve
5. Rotational direction switch
6. Lock-on button for On/Off switch
7. On/Off switch
8. Release button for mode selector switch
9. Mode selector switch
10. Bolt for depth stop adjustment
11. Depth stop
12 .Auxiliary handle (insulated gripping sur-
face)
13 .Handle (insulated gripping surface)
Technical parameter
Model PBH26-C5
Rated voltage 220 V~/50 Hz
Rated output power 1000 W
Rated speed 0-1300 r/min
Impact frequency 0-5300 ipm
Drilling diameter 26 mm
Impact force 3.2 J
Weight 5.5 kg
Contents of delivery
Electric hammer drill 1 pc
Cement drill 4 pcs
Auxiliary handle 1 pc
Depth delimiter 1 pc
Flat chisel 1 pc
Instruction manual 1 pc
Note
Since the product is constantly being
improved, P.I.T. reserves the right to make
changes to the specifications and product
specifications specified here without prior
notice.
Assembly
► Before any work on the machine itself,
pull the mains plug.
Auxiliary Handle
► Operate your machine only with the
auxiliary handle.
Changing the position of the auxiliary han-
dle (see fi gure A)
The auxiliary handle can be set to any posi-
tion for a secure and low-fatigue working pos-
ture.
- Turn the bottom part of the auxiliary handle
n counterclockwise direction and swivel
the auxiliary handle to the desired position.
Then retighten the bottom part of the aux-
iliary handle by turning in clockwise direc-
tion. Pay attention that the clamping band
of the auxiliary handle is positioned in the
groove on the housing as intended for.
Adjusting the Drilling Depth (see fi gure B)
The required drilling depth can be set with the
depth stop.
- Lossen the bolt for the depth stop adjust-
ment and insert the depth stop into the
auxiliary handle. The knurled surface of
the depth stop must face downward.
- Insert the SDS-plus drilling tool to the stop
into the SDS-plus tool holder. Otherwise,
the movability of the SDSplus drilling tool
can lead to incorrect adjustment of the
drilling depth.
- Pull out the depth stop until the distance
between the tip of the drill bit and the tip
of the depth stop corresponds with the de-
sired drilling depth.
- Then tighten the bolt for the depth stop ad-
justment to fi x he depth stop.
Selecting Drill Chucks and Tools
For hammer drilling and chiselling, SDS-plus
tools are required that are inserted in the
SDS-plus drill chuck.
For drilling without impact in wood, metal, ce-
ramic and plastic as well as for screwdriving,
tools without SDS-plus are used (e.g., drill
bits with cylindrical shank). For these tools,
a keyless chuck or a key type drill chuck are
required.
Changing the Tool
The dust protection cap largely prevents the
entry of drilling dust into the tool holder during
operation. When inserting the tool, take care
that the dust protection cap is not damaged.
► A damaged dust protection cap should
be changed immediately. We recommend
having this carried out by an after-sales
service.
Inserting SDS-plus Drilling Tools (see fi g-
ure C)
The SDS-plus drill chuck allows for simple
and convenient changing of drilling tools with-
out the use of additional tools.
- Insert the SDS-plus quick change chuck.
- Clean and lightly grease the shank end of
the tool.