P.I.T. PBH20H-22B/1, Manual, Page: 8 / 25

Cordless Hammer Drill
7
power tool to the mains and/or battery,
or lifting or carrying the power tool, make
sure that it is turned off. Holding your
finger on the switch while transporting the
power tool and connecting the power tool
to the mains while the power tool is on can
cause an accident.
►
Remove the setting tool or wrenches
before turning on the power tool. A tool or
wrench placed in a rotating part of a power
tool can cause injury.
►
Do not assume an unnatural body position.
Always take a stable position and keep
your balance. This gives you better control
of the power tool in unexpected situations.
►
Wear suitable work clothes. Do not wear
loose clothing or jewelry. Keep hair and
clothing away from moving parts. Loose
clothes, jewelry or long hair can be caught
in rotating parts.
►
If it is possible to install dust extraction
and dust collection devices, check their
connection and correct use. The use of
a dust extractor can reduce the danger
posed by dust.
►
Good knowledge of power tools, gained as
a result of their frequent use, should not
lead to self-confidence and disregard for
safe handling of power tools. One careless
action in a fraction of a second can result
in serious injury.
ATTENTION! In the event of an interruption
in the operation of the power tool due to a
complete or partial loss of power supply or
damage to the power control circuit, set the
switch to the off position, making sure that it
is not blocked (if any). Disconnect the mains
plug from the socket or remove the removable
battery. This prevents an uncontrolled restart.
Power tool use and handling
►
Do not overload the power tool. Use the
appropriate special power tool for the job.
With the right power tool, you work better
and more reliably in the specified power
range.
►
Do not operate a power tool with a faulty
switch. A power tool that cannot be turned
on or off is dangerous and must be
repaired.
►
Before setting up the power tool, changing
accessories, or storing the power tool,
unplug the power tool from the wall outlet
and/or remove the battery if possible. This
precaution prevents the power tool from
being switched on unintentionally.
►
Keep power tools out of the reach of
children. Do not allow anyone who is
not familiar with it or who has not read
these instructions to use the power tool.
Power tools are dangerous in the hands of
inexperienced persons.
►
The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience or knowledge,
unless they have been given supervision
or instruction regarding the use of the
appliance by a person responsible for their
safety.
►
Ta k e g o o d c a r e o f p o w e r t o o l s a n d
accessories. Check the function and
running of the moving parts of the power
tool for perfect function, for breakage or
damage that would impair the function of
the power tool. Damaged parts must be
repaired before using the power tool. Poor
maintenance of power tools is the cause of
a large number of accidents.
►
Keep cutting tools sharp and clean.
Carefully maintained cutting tools with
sharp cutting edges are less likely to jam
and are easier to guide.
►
Use power tools, accessories, work tools,
etc. in accordance with these instructions.
Consider the working conditions and the
work to be done. Use of power tools for
unintended work can lead to dangerous
situations.
►
Keep handles and gripping surfaces dry
and clean and free from oil or grease.
Slippery handles and gripping surfaces
prevent safe handling of the tool and
prevent reliable control in unforeseen
situations.
Application and maintenance of
cordless tools
►
T h e b a t t e r y i s n o t f u l l y c h a r g e d
when shipped. To ensure full battery
performance, fully charge the battery
before first use.
►
Use the battery only in combination with
your P.I.T. This is the only way to prevent
dangerous battery overload.
►
Charge batteries only with chargers
recommended by the manufacturer. A
charger designed for certain types of
batteries may present a fire hazard when
used with other batteries.
►
Only use the batteries specified for this
purpose in power tools. Use of other