background image

IMPORTANT SAFETY INFORMATION

For your safety, the information in this manual must be followed to minimize the risk of fire, electric
shock or personal injury. 

The instructions issued in this manual are not meant to cover all possible condi-

tions and situations that may occur. It must be understood that common sense, caution, and care must be used
when installing operating or maintaining any appliance. Failure to install, maintain, and/or operate the equip-
ment according to these instructions may result in conditions which can produce bodily injury and/or property
damage.

• Turn the dehumidifier OFF and unplug it before cleaning.

• To reduce the risk of fire or explosion, do not store or use gasoline or other flammable vapors or liquids in

the vicinity of this or any other appliance.

• DO NOT attempt to service this unit yourself. 

To reduce the risk of fire, electric shock, or personal injury, all wiring
and grounding must conform with the latest edition of Local and

following instructions contact a qualified electrician.

It is your responsibility to have the wiring and fuses checked by a qualified electrician to make sure adequate
electrical power is available. Check available power supply and resolve any wiring problems BEFORE
installation and operation of this unit.

This appliance is designed to operate on a separate branch, polarized, three-wire, effectively grounded 120
Volt 60 Hertz (alternating current) circuit protected by a 15 ampere fuse, equivalent fuse or circuit breaker. 
The three-prong grounding plug on the power cord should be plugged directly into a polarized, three slot,
effectively grounded receptacle rated 110/120 V.A.C.

Improper connection of the equipment-grounding conductor can result in a risk of electrical shock.

Check with a qualified electrician if you are in doubt as to whether your appliance outlets are properly
grounded. 

This appliance must be grounded.This appliance is equipped with a cord having an equipment-grounding con-
ductor and 3 prong grounding plug. The plug must be connected into an outlet that is properly installed and
grounded in accordance with all local codes and ordinances. 

Under no circumstance 

cut or remove the third

(ground) prong from the plug provided with this appliance. Where a 2 prong wall outlet is encountered, or the
plug will not otherwise properly fit the outlet, it is your personal responsibility and obligation to have a proper
outlet installed by a qualified electrician. 

DO NOT use an adapter plug or extension cords with this unit

. If

the household electrical supply does not meet the above specifications, or if you are not sure your home has an
effective ground, have a qualified electrician or your local electrical utility company check it and correct any
problems. 

FOR YOUR

SAFETY

ELECTRICAL SERVICE

INFORMATION

GROUNDING

INSTRUCTIONS

3

READ ALL INSTRUCTIONS BEFORE USING

WARNING

near the unit for your safety disconnect the power supply before stepping into the water.

• Never operate this dehumidifier in an area that is likely to have standing water. If there is water under or

National Electrical codes. If you have any questions regarding the

Summary of Contents for Generations GDR50A1C














Reviews: