Page | 4
3.
SB-218 Cabinet Details
The SB-218 is an active dual woofer subwoofer system, featuring lightweight neodymium woofers,
pascal amplification and remote control DSP on-board. The cabinet is constructed from Baltic birch
plywood, and coated in an extremely durable polyurea coating. Wheels are included on the rear of
the enclosure to allow easy transportation, and there are multiple handles to aid positioning.
4.
Setup and use of VIA SUB
ATTENTION: SEE RIGGING MANUAL FOR SUSPENSION DETAILS.
4.1.
AC Mains connection
The SB218 enclosure uses the Neutrik Powercon TRUE1 © system for all AC mains connections, at
universal voltages between 85-265Vac.
NOTE: Due to the high power consumption of the SB218 SUB, it is not allowed to link
cabinets together. Separate power cables must be used for each cabinet.
Ensure cable of a sufficiently large diameter for the current capacity is used. P.Audio
recommends the use of 2.5mm
2
wire. Ready-made cable sets are available through
P.Audio, and are included in Line Array ‘sets’.
