READ ALL OF THE INSTRUCTIONS INCLUDED IN THIS MANUAL
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operation and maintenance instructions.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence
of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
1.
The following safety notices must be read and adhered to for safe operation of the CXP range of products.
2.
Copies of this manual should be retained by the system’s installer AND end-user.
3.
This manual must be read and understood and ALL warnings must be followed.
4.
Follow all instructions to insure optimal product performance.
5.
The CXP Active products are convection-cooled devices and require at least 6 inches (152 mm) of clearance behind the
enclosure to allow the heat sink to adequately cool the internal electronics.
6.
DO NOT INSTALL NEAR ANY HEAT SOURCES!
7.
Use ONLY the supplied AC Mains connector.
8.
Protect the AC Mains power cord from being walked on or otherwise damaged and inspect for damaged connections
and damaged insulation.
9.
The CXP Series may be suspended, with the exception of CXP-21Sub. DO NOT SUSPEND THE CXP-21Sub
10.
DO NOT SUBSTITUTE SUSPENSION HARDWARE.
11.
SUSPENSION SHOULD BE ATTEMPTED BY A PROFESSIONAL THAT IS FAMILIAR WITH LOCAL AND NATIONAL CODES AND
SAFE SUSPENSION PRACTICES!
12.
There are NO user-serviceable parts inside the enclosure. DO NOT REMOVE THE AMPLIFIER MODULE!
13.
DO NOT use in outdoor/direct weather installations or applications. Use in INDOOR dry applications ONLY!
