7
DISASSEMBLY INSTRUCTION
Release guy ropes.
STEP 1:
Remove pegs with a claw hammer or peg
puller. Do not remove pegs from the ground by
pulling on Ensuite base as this may cause
damage to the Ensuite.
STEP 3:
Collect and gather the Ensuite and frame into a
compact cylindrical bundle with only ever using
a small force at any time. Ensure all loose fabric
is folded within the edges of the Ensuite frame.
STEP 4:
Once the Ensuite bundle is rolled up, place the
provided tie straps around it and secure firmly
but not tight and place into the tent carry bag
with peg bag, instruction booklet and other
miscellaneous parts. If the Ensuite will not fit
into carry bag, unroll and roll again paying
more attention to folding the fabric more
carefully and ensuring air has escaped
successfully during collapsing the Ensuite.
STEP 5:
To collapse the ensuite, ensure windows and
doors are open to allow air to escape from
inside the Ensuite. Beginning at one corner
pole of the Ensuite frame, release the locking
pin holding the telescopic pole in it extended
position, the pole will retract to approximately
half height, repeat this process for the other
three corner poles of the Ensuite frame as you
walk around the Ensuite. The Ensuite will
collapse during this step and the tension will be
removed from the central roof hub and the
wall/roof frame elbow. To unlock and release
the wall to roof frame elbow hub apply a small
expanding force to the poles on either side of
the elbow, as indicated in Figure 8. Now reach
over a place a small force downwards onto the
central roof hub to collapse the hub towards
ground level, as indicated in figure 3.
STEP 2:
WARNING
At no stage is it necessary to apply any
excessive force to achieve any of the
above steps. The frame is tensioned, but
if the correct action is applied the Ensuite
will pack up with little or no force
required. Excessive force will result in
damage to the frame and this is not
covered by warranty.
Loc
k
Un
loc
k
Figure 8
