6
7
Oztent EYRE Owner’s Manual
Oztent EYRE Owner’s Manual
2.
Zip the Front Panel on from Right to Left.
3.
Zip the sides of the Front Panel to the sides of
the Side Panels and secure velcro tabs.
SETTING UP YOUR FRONT PANEL (OPTIONAL)
COMPLETE OZTENT EYRE PARTS LIST
1.
Assemble your ridge pole. twist to lock at desired location.
Additional poles, pegs and ropes available for
purchase to allow the Front Panel to be set up as
another awning.
*
Unpack your Oztent Tagalong Tent. Insert the
Ridge Pole in your Oztent Awning. Twist and
lock Ridge Pole when in place.
1.
2.
Attach your Tagalong Tent,
right hand side first.
Zip from right to left.
SETTING UP YOUR TAGALONG TENT (OPTIONAL)
OZTENT WARRANTY INFORMATION
Important notice: Details of the product in this owner’s manual may vary from the actual product. Images are for illustrative purposes only.
4.
Peg at all base peg points and set up support
poles. Extend all guy ropes, peg and secure.
3.
Attach top corner straps to your Oztent Awning
Poles. Tighten straps. Attach velcro straps of
Tagalong Tent on Oztent Awning Poles.
Note: Rear corners need two pegs.
6
5
7
2
3
3
1
4
4. Foot fitting
5. Foot
7. Brace Extrusion with Fittings
6. M8 Nut, Washer and Slider
3. Corner
2. Hinge
1. Main Extrusion (May Require Cutting)
IMPORTANT – REGISTRATION REQUIRED
This manufacturer’s warranty will only be valid if your product
purchase is registered with Oztent. To register, visit our website
and visit our “Register your product” page.
Oztent will confirm receipt within 14 days and issue a Customer
Registration Number. If you have not received your Customer
Registration Number within 14 days please phone us to confirm
we have received your registration. This manufacturer’s
warranty will not be valid if your product is not registered.
Oztent will repair or replace any registered Oztent product
if that product requires repair due to a manufacturing
or materials defect (such as water leaks, faulty stitching,
delamination, faulty zips, faulty fittings or faulty material)
appearing and notified to Oztent within the following warranty
periods:
Furniture - 5 years from date of purchase
Tents & Awnings - 2 years from date of purchase
Any other product - 1 year from date of purchase
EXCLUSIONS.
This manufacturer’s warranty is limited to
manufacturing or materials defects. This does not include
damage caused by wear and tear, condensation, dragging,
abuse or misuse, accidents, falling objects, improper set up,
burn holes, extreme weather or damage caused by insects,
animals or children.
HOW TO MAKE A CLAIM
To make a claim on this manufacturer’s warranty please return
your product to Oztent at the address below. You must provide
your Customer Registration Number with the product. If you
purchased the product less than 14 days ago, or you have lost
you Customer Reference Number, please telephone Oztent
between Monday to Friday 9:00am to 5:00pm (Sydney time). All
transport costs related to returning the product for assessment
or repair under this manufacturer’s warranty is payable by the
customer.
OTHER RIGHTS
The benefits given by this manufacturer’s warranty are
additional to other rights and remedies that you may have
under law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
