11
GPT3G003 OzSpy User Manual
the tracker will send back the information “Username: username, Password: password”, if the
password is not right, the operation is faulty, the tracker will send back information “Wrong
Password”.
7. Enable and Disable Overspeed Alarm (No Platform Necessary)
Send SMS “OVERSPEEDALARMON*123456*SSS” to the tracker number,
“OVERSPEEDALARMON” is command, “123456” is password, “SSS” is the setting alarm speed,
unit is km/hour. The tracker will send back the information “Set Overspeed Alarm On: SSS
km/h”.
After you have enabled the Overspeed alarm, the system will check the speed every 5
minutes. If the speed is higher than the setting speed, the tracker will send an alarm and its
location information by SMS to the authorized phone number A (
only sends to A
), The
authorized phone will receive max 3 alarm SMS per hour, one hour later it will be active again.
The Overspeed alarm SMS is as follow:
Overspeed Alarm
Current Speed:110km/h, Setting:100km/h
Battery:88%
Send SMS “OVERSPEEDALARMOFF*123456” to the tracker number,
“OVERSPEEDALARMOFF” is command, “123456” is tracker password, the tracker will send back
the information “Set Overspeed Alarm Off”.
Note: In the default, the over speed alarm setting is OFF.
