5. Setting up fence breach
Geo-fence will help you to restrict the target within a certain set area. When the target
breaches the restricted area, you’ll get a message alerting you.
Note: You need to let the tracker stay still for 10 minutes before you send the command to
it.
The command is
stockade123456 (latitude)1e, (longitude)1n; (latitude)2e, (longitude)2n
Example (stockade123456 153.161641e,-27.654471n; 153.173954e,-27.662054n)
The following picture will show you how it works; the restricted area is defined by
the two coordinates you set.
As soon as your geographic square is breached you will be alerted!
If the Area is 10km x 10km or smaller the tracker will not trigger until target is
1.5km outside the area
Authorization of Tracker
There are only 5 numbers maximum able to be authorized to use the tracker.
To authorise a mobile phone number Send:
admin123456 (admin phone number)
Example:
admin123456 0405678432
If number is successfully authorized the tracker will reply Admin OK!
Summary of Contents for GPT002
Page 1: ...GPT002 User Guide ...
