1
OzSpy Issued Manual
BACK
FRONT
Note: On/Off Switch in red box
Using the Device
To start using, move the On/Off switch into the
‘On’ position (marked as ‘1’ on
the back of the device) and the LED will start to flash.
Aim the detector where you want to check for a hidden camera and or wireless
microphone in operation.
If the LED stays solid and no longer flashes, there is either:
o
WiFi signal detected (2m maximum distance)
o
Cellular phone in use (5m maximum distance)
To stop using, move the On/Off switch into the
‘Off’ position (marked as ‘0’ on
the back of the device) and the LED will no longer flash.
If the LED light remains solid when turned on, the battery may need replacement
