Ozontech XT - series User Manual Download Page 4

 

Manual 

 

                                                                                                                                     

www.industrisal-needs.com

 

 

 

Do not operate with the device  as long as the  enclosure is missing or as long as there 
are errors in its construction.  

The  device  features  an  air  blower  with  an  air  filter.  The  inlet  and  outlet  of  the  device 
must  be  kept  clear  and  may  not  be  blocked  under  any  circumstances.  The  minimum 
distance from walls and objects of the devices should be approx.. 30 cm.  

Do never cover the device or remove it from the applied area during operation. 

The device may not be exposed to a  direct water beam, rain or any  kind of humidity.  If 
water  or  liquids  penetrate  the  device,  it  must  be  switched  off  and  checked  on  by 
professional personnel before operating it again.  

Let the device prior to application acclimate to the surrounding temperature 

This device is only designed for the applications mentioned in this manual. In case the 
device is used for any other application than these, it might lead to hazardous situations. 

Safety measures for indoor-operations 

The  national  relevant  guidelines  for  operation  with  ozone  must  be  followed.  Ozone  is  a  toxic 
oxidizing  agent  and  proves  to  be  hazardous  and  harmful  to  the  health.  There  are  certain  safety 
measures that must be followed to avoid an uncontrolled release of the gas.  

CAUTION:

  Ozone  cannot  be  inhaled!  It  causes  a  reduced  lung  efficiency,  which  can  continue  for 

                  several days! 

Safety measures and equipment:

 

 

Wear masks with ozone filters, which cover the eyes, mouth and nose.  

 

The treated rooms must have a sufficient supply of fresh air and a sufficient air exhaust. 

Seek immediate medical attention in the following cases: 

 

Inflammation of the eye, feeling of dizziness and extensive tussive irritation.  

 

Dyspnoe and pain during inhalation.  

Specified Application 

The  device  is  designed  for  neutralization  of  smells  and  the  disinfection  indoors  by  the  fission  of 
molecules  and  cells  by  means  of  ozone.  The  ozone  is  generated  by  the  device  itself  and  emitted 
through  the  air  blower.  The  device  was  designed  to  neutralize  smells  in industrial  and  commercial 
areas. The operation conditions for this device are an air temperature of +10 to +40 °C and a relative 
air humidity of max. 80 %.  

Standard Delivery Contents:  

1 x ozone generator XT-series 
1 x IR remote control incl. battery 
1 x instruction manual 
 

 

Summary of Contents for XT - series












Reviews: