Ozone Solos, Pilot'S Manual

Page: 22 / 27

USE AND MAINTENANCE
19
CONNECTION TO THE WING
There are no other suitable attachment points for the risers on the harness.
PRE-FLIGHT CHECKS
Before take off it is important to carry out a thorough pre-flight check.
• Ensure the parachute pins are correctly in place and the zips around the parachute container are closed
• Visual check of structural webbing looking for any obvious damage
• Visual check of the carabiners looking for cracks or any signs of fatigue
• Risers connected correctly to the carabiners without twists
• Speed system attached and not tangled around the webbing
• Ensure all pockets are closed and zipped up
• Leg / Chest strap done up correctly
• Shoulder strap retainers fastened correctly
• Double check your leg straps
Attach the wing’s risers to the carabiners at the main
hang points. The A risers should be facing to the outside.
2
1
If you change the carabiners ensure that they are of
a suitable dimension and fit correctly. The carabiners
must be passed through both blue loops 1 & 2 - the
main hang point (1) and the lumbar support loop (2).