Ozone Roadster 3 22 Manual Download Page 32

30

If you damage a line:

Any  line  that  is  visually  damaged  MUST  be  replaced.  Use  a  reputable  paragliding  service 

centre to make the replacement lines or contact your local Ozone dealer.

It is important that replacement lines are made from the correct materials and diameters. You 

should check lengths against their counterpart on the other side of the wing to make ensure 

symmetry. Once the line has been replaced, inflate and check the glider before flying.  

Maintenance  Checks 

Your  wing,  like  a  car,  should  be  technically  checked  to  ensure  proper  airworthiness.  Your 

wing  should  be  checked  by  a  qualified  professional  for  the  first  time  after  24  months,  or 

after 100 hours. However, if you are a frequent flyer (more than 100 hrs per year), then we 

recommend, that you get your glider checked annually. The checker should inform you about 

the condition of your glider and if some parts will need to be checked or changed before the 

next normal service check period.

The sail and the lines do not age in the same way or at the same rate; it is possible that you 

may have to change part or all of the lines during the wing’s life. For this reason it is important 

to do regular inspections so that you know the exact condition of all of the components of your 

glider. We recommend that inspections are carried out by a qualified professional.

You  alone  are  responsible  for  your  flying  kit  and  your  safety  depends  on  it.  Take  care  of 

your equipment and have it regularly inspected. Changes in inflation/groundhandling/flying 

behaviour indicates the gliders aging, if you notice any changes you should have the wing 

checked before flying again. These are the basic elements of the check up.

Porosity is measured with a porosity meter, the time taken by a certain volume of air to go 

through a certain surface of the cloth. The time in seconds is the result. A measurement is 

done in a several places on the top surface along the span of the glider behind the leading 

edge.

IMPORTANT

Take care of your 

glider and make sure 

you have it checked 

and serviced according 

to the schedule.

Summary of Contents for Roadster 3 22








































Reviews: