8
/
SZ SERIES
OZONE SOLUTIONS
SECTION 4
MAINTENANCE AND REPLACEMENT PARTS
Issue
Maintenance Action
Part #
Quantity
Air too moist
Replace or regenerate air dryer
desiccant media
Desiccant
0.75 lbs.
Ambient ozone not being destructed Replace the ozone destruct media
CBO-800M 115mm
2
Internal fan stopped working
Replace fan
Sunon Fan-ball bearing 1
Ozone Generator does not run
Replace generator
HG-1500
1
Blown Fuse
Replace fuse
5A/250V Fuse
1
Check valve allows water backflow
Replace check valve
CVLP-4
1
Pump not working
Replace pump
SinkZone Pump
1
If these actions do not solve the respective issues, contact the Ozone Solutions service department at 712.439.6880
for further troubleshooting and issue documentation.
WARRANTY
Ozone Solutions warrants all equipment assembled,
manufactured, and sold to be free from defects in
material and workmanship under normal use and
service for a period of one (1) year after date of sale to
the original purchaser.
Some products may have a specific warranty period
other than what is outlined in this document. For
such products, the manufacturer warranty will
supercede this warranty. Ozone Solutions will honor
the manufacturer’s warranty, but if and when advised
by the manufacturer, may have the customer deal
directly with the manufacturer. This warranty covers all
parts that are not outlined in a product maintenance
schedule. This warranty will be void if any piece of the
equipment is used in a manner other than what is
explicitly outlined in the product manuals.
If any part of the equipment manufactured by Ozone
Solutions proves to be defective during the warranty
period, please call Ozone Solutions at 712.439.6880,
or email [email protected].
Prior authorization is required before working on
or shipping a product back to us. Failure to get prior
authorization may result in denial of your claim. Once
authorized, you may return the defective equipment
to Ozone Solutions with the transportation charges
prepaid. If Ozone Solutions finds the equipment to
be defective, it will be repaired or replaced at our
discretion, free of charge, to the original purchaser
(F.O.B. factory).
This warranty shall not place any liability on Ozone
Solutions for any transportation charges, labor, or
cost for, or during the replacement of any parts. The
replaced part(s) or product will then continue the
original warranty duration. The replaced parts will not
start a new one (1) year coverage period. The purchaser
by acceptance of the equipment will assume all liability
for the consequences of its use or misuse by the
purchaser, employees, or others. This warranty shall
not apply to any piece of equipment, or part thereof
sold by this company which has been subject to any
accident caused in transit, alterations by unauthorized
service, negligence, abuse, or damage by flood, fire, or
act of God.
This warranty shall constitute the entire warranty and/
or agreement between Ozone Solutions and the original
purchaser, and in lieu of all other warranties, expressed
or implied, either oral or written, including the warranty
of merchantability and fitness for a particular use and
of all other obligations or liabilities on our part. Ozone
Solutions neither assumes nor authorizes any other
person or entity to assume for us any liability associated
with the sale of its products or equipment.
The term “original purchaser,” as used in this warranty,
means whom the product was originally sold to by Ozone
Solutions or by an authorized dealer. Ozone Solutions
reserves the right to make changes in its products
without notice. Because of this, Ozone Solutions is not
obligated to replace warranty defective part(s) and/or
product with the same original part or product.
Summary of Contents for SINKZONE
