4. CONTROLS
ZLGGS-012
Trigger Flow Control
2 Press the surfaces
to be glued
together within
15 seconds for a
strong bond.
1 Squeeze the trigger flow
control to release the glue.
3 To stop the flow of glue from
the gun, release the trigger
flow control.
The flow rate of the glue is dependent on how much pressure is applied
to the trigger flow control.
Tip:
Ensure the glue sticks are heated fully to allow an even flow of glue.
WARNING!
DO NOT ALLOW HOT GLUE TO COME IN
CONTACT WITH PRODUCT HOUSING DURING USE.
