Ozito ZLBP-015U Instruction Manual Download Page 2

BATTERY PROTECTION SYSTEM

The tool is equipped with a battery protection system, which helps to 

ensure longevity of the battery.

The output power automatically cuts off during operation when the tool 

and/or battery are placed under the following situations:

•  

When the tool is overloaded:    

   If this occurs, release the trigger switch and remove causes of 

overload, then pull the switch trigger again to restart. 

•  

When the remaining battery capacity becomes low: 

  Recharge the battery pack.

Note: 

 The battery protection system does not in any way damage the 

tool.

Note:  

The indicated capacity may be lower than the actual level during 

use or immediately after using the tool.

ZLBP-015U

CHARGING YOUR LITHIUM ION BATTERY

This battery has been shipped in a low charge condition, and requires 

charging prior to use. Allow several cycles of charging and discharging 

(through use with a compatible tool) for the battery to reach its optimum 

performance / runtime.
This battery has two compatible Ozito chargers available through your 

local Bunnings Warehouse:

•  

ZLCG-112U Fast Charger

•  

ZLCG-312U Eco Charger

Only use the battery pack with Ozito Home 12Volt cordless 

products.

1.  Insert the power plug of the charger into the mains socket outlet. 

The red LED on the plug will begin to illuminate when properly 

connected to power supply.

2.  Insert the battery pack into the battery charger .

3.  Remove battery from the charger once fully charged. Disconnect 

the charger from the power supply.

Note: 

The battery pack can become a little warm during the charging. 

This is normal

If the battery pack fails to charge, check:

•   if there is voltage at the socket outlet

•   that the battery and charger are properly connected.

If the battery pack still fails to charge, please contact our customer 

service center.

1.  OPERATION

WARRANTY

All of our products undergo strict quality checks to ensure that they 
reach you in perfect condition. In the unlikely event that your device 
develops a fault, please contact our service department at the address 
shown on this guarantee card. You can also contact us by telephone 
using the customer service number shown. Please note the following 
terms under which guarantee claims can be made:
1.  These warranty terms regulate additional warranty services, which 

the manufacturer mentioned below promises to buyers of its new 
products in addition to their statutory guarantee claims are not 
affected by this guarantee. Our guarantee is free of charge to you.

2.  The warranty services only covers defects due to material or 

manufacturing faults on  
a product which you have bought from the manufacturer mentioned 
below are limited to either the rectification of said defects on the 
product or the replacement of the product, whichever we prefer.  
Please note that our devices are not designed for use in 
commercial, trade or professional applications. A guarantee contract 
will not be created if the device has been used by commercial, trade 
or industrial business or has been exposed to similar stresses during 
the guarantee period.

3.  The following are not covered by our guarantee: 

- Damage to the device caused by a failure to follow the assembly 
instructions or due to incorrect installation, a failure to follow the 
operating instructions (for example connecting it to an incorrect 
mains voltage or current type) or a failure to follow the maintenance 
and safety instructions or by exposing the device to abnormal 
environmental conditions or by lack of care and maintenance.  
- Damage to the device caused by abuse or incorrect use (for 
example overloading the device or the use or unapproved tools or 
accessories), ingress of foreign bodies into the device (such as sand, 
stones or dust, transport damage), the use of force or damage 
caused by external forces (for example by dropping it).  
- Damage to the device or parts of the device caused by normal or 
natural wear or tear or by normal use of the device.

4.  Your Product is guaranteed for a period of 60 months from the 

original date of purchase and is intended for DIY (Do It Yourself) use 
only. Lithium Ion batteries and chargers are covered by a 12 month 
warranty. Warranty excludes consumable parts, for example: 
grinding discs. Guarantee claims should be submitted before the 
end of the guarantee period within two weeks of the defect being 
noticed. No guarantee claims will be accepted after the end of the 
guarantee period. The original guarantee period remains applicable 
to the device even if repairs are carried out or parts are replaced. In 
such cases, the work performed or parts fitted will not result in an 
extension of the guarantee period, and no new guarantee will 
become active for the work performed or parts fitted. This also 
applies if an on-site service is used. 

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST 
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR 
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing 
parts, consumables and missing parts as set out in the service 
information in these operating instructions. 
CUSTOMER SERVICE HELPLINE  
GB: 0151 294 4488  
IRL: 1850 882711  
Ozito-diy.co.uk

iSC GmbH · Eschenstraße 6 · 94405 Landau /Isar · Germany

Manual_ZLBP-015U.indd   2

06.08.2019   10:33:40

Reviews: