The high pressure air hose can be used to inflate high pressure items such
as car and bike tyres or sporting equipment.
1. Attach the required inflation adaptor to the
high pressure hose and secure using the
locking lever.
2. Insert / attach the hose adaptor to the item
to be inflated.
3. Adjust the target pressure using the “+”
and “-” pressure adjustment buttons.
Note:
The required pressure should be
written on the item.
4. Press the operating mode switch into “I”
position to start inflating the high pressure
item.
5. Once the preset pressure
is reached, the tool will
automatically shut-off. After the
tool has automatically shut off,
press the operation mode switch
into the off position “0”.
Note:
For sporting equipment due to the small size and low pressure, the
inflator may automatically cut-off prior to reaching the desired pressure. In
this case, cycle the unit on and off until the required pressure is reached or
top it off with the manual mode.
Memory Function
The inflator features a memory function so that once a preset pressure is
set, this value will be remembered until the power supply is disconnected.
This function allows you to easily inflate multiple items to the same
pressure.
1. Follow steps 1-5 above to inflate the first item.
2. Once the operation mode switch is in the off position “0”, disconnect the
object from the air hose.
3. Connect the next item and switch back into mode “I” to inflate the item to
the same preset pressure.
Note:
If the power supply is disconnected, the memory of the tool will be
reset.
The high volume air hose can be used to inflate high volume items by
connecting to the air outlet, or deflate high volume items by connecting to
the air inlet.
An example of a high volume item is an air mattress or pool toy.
1. Remove the high volume air hose from the housing and attach to the ‘AIR
OUT’ port.
If deflating objects, attach the hose to the ‘AIR IN’ port instead.
2. Insert the adaptor into the
inflatable item.
Note:
If the inflatable item has a
cap or air lock, ensure it is removed
or unlocked to allow air to flow into
the item.
WARNING!
ENSURE THE INFLATOR INLET IS NOT
BLOCKED DURING INFLATION AND THE OUTLET IS
NOT BLOCKED DURING DEFLATION.
3. Press the operating mode switch
into “II” position to start inflating
the high volume item.
4. Once the item is completely
inflated, press the operation mode
switch into the off position “0”.
4. HIGH PRESSURE INFLATION
5. HIGH VOLUME INFLATION
PXHDIS-018
WARNING!
DO NOT INFLATE THE OBJECT ABOVE
THE RECOMMENDED INFLATION PRESSURE. THIS
MAY LEAD TO DAMAGE AND/OR INJURIES.
AC
DC
I
0
I
+
MODE
I
a
b
AC
DC
I
0
I
+
MODE
I
a
b
AC
DC
I
0
I
+
MODE
I
a
b
AC
DC
I
0
I
+
MODE
I
a
b
AC
DC
I
0
I
+
MODE
I
a
b
