SPARE PARTS
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse or Homebase
store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: [email protected]
DESCRIPTION OF SYMBOLS
SERVICE INFORMATION
Please note that the following parts of this product are subject to normal
or natural wear and that the following parts are therefore also required
for use as consumables.
* Not necessarily included in the scope of delivery!
Category
Example
Wear parts*
Roller (cutter head)
Consumables*
Metal cutting plate (pressure plate)
Missing parts
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic
equipment and its implementation in national laws, old electric power tools have to be
separated from other waste and disposed of in an environment-friendly fashion, e.g. by
taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the
electrical equipment must make sure that the equipment is properly disposed of if he no
longer wants to keep the equipment. The old equipment can be returned to a suitable
collection point that will dispose of the equipment in accordance with the national recycling
and waste disposal regulations. This does not apply to any accessories or aids without
electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation
and papers accompanying products is permitted only with the express consent of the iSC
GmbH.
Subject to technical changes.
Declaration of Conformity
Danger!
Sound and vibration
Sound and vibration values were measured in accordance with the standards
EN ISO 3744: 1995, EN ISO 11201: 1995, and EN ISO 20643: 2005.
L
pa
at the operator position:
79.4 dB(A)
K
pa
uncertainty:
3 dB (A)
L
wa
sound power level
92 dB (A)
Operating mode S6 40%: Continuous operation with idling (cycle time 10 minutes). To
ensure that the motor does not become excessively hot it may only be operated for 40%
of the cycle at the specified rating and must then be allowed to idle for 60% of the cycle.
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions) determined in accordance with
EN 60745.
Keep the noise emissions and vibrations to a minimum.
• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
ADDITIONAL INFORMATION
Important! Read the operating instructions and follow the
warnings and safety instructions.
Take care when the blades are rotating. Do not put your
hands or feet into openings when the machine is running.
Important! Keep other persons and animals away from the
danger zone.
Important! Protect the machine from the damp and never
expose it to rain.
Important! Always wear safety goggles, ear muffs,
protective gloves and heavy-duty work clothes!
Always set the ON/OFF switch to OFF and pull the
power plug out of the socket-outlet before doing any work
on the shredder, e.g. cleaning the shredder and making
adjustments, or if the power cable becomes damaged.
Explanation of the safety switch on the debris box: The
switch is in the “Lock is closed” position: The shredded
material debris box is locked. The shredder can be switched
on. The switch is in the “Lock is open” position: The shredded
material debris box is not locked and can be removed. The
shredder cannot be switched on.
Explanation of the lever for adjusting the cutting plate:
Turning clockwise reduces the distance between the cutting
unit and the cutting plate. Turning counter-clockwise
increases the distance between the cutting unit and the
cutting plate.
Direction control switch: For description of the direction control
switch see heading
3. DIRECTION
in the
SETUP &
PREPARATION
section of this manual.
0
Liu/Product-Management
Weichselgartner/General-Manager
explains the following conformity according to EU directives and norms for
the following product
Silent Shredder SSH-2540CBU (Ozito)
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X
2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X
2011/65/EU
X
2006/42/EC
Annex IV
Notified Body:
Notified Body No.:
Reg. No.:
X
2000/14/EC_2005/88/EC
X
Annex V
Annex VI
Noise: measured L
WA
= 91,3 dB (A); guaranteed L
WA
= 94 dB (A)
P = 2,6 KW; (s6/40%); L/Ø = cm
Notified Body:
2012/46/EU
Emission No.:
Standard references: EN 50434; EN 60335-1; EN 62233;
EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-11
Landau/Isar, den 13.12.2017
First CE: 17
Archive-File/Record:
NAPR018142
Art.-No.:
30.002.07
I.-No.: 11027
Documents registrar:
Alex Kurz
Subject to change without notice
Wiesenweg 22, D-94405 Landau/Isar
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
3000207_11017_SSH_2540CBU.indd 135
13.12.2017 15:51:24
