5. USING THE SANDER POLISHER
4. CONTROLS
OPERATION
SPR-7100
1 Press and hold the lock-off
button in.
3 Once the tool has started,
you can release the lock-
off button.
1 To increase the speed
rotate the variable speed
dial to a higher number.
2 Squeeze the on/off trigger
to start the tool.
4 To stop the tool release the
on/off trigger.
2 To lower the speed rotate
the variable speed dial to a
lower number.
5
6
2
1
Switching On/Off
Variable Speed dial
WARNING!
tHE POWER SUPPLy FOR tHIS PROdUCt
SHOULd BE PROtECtEd By A RESIdUAL CURRENt
dEVICE (RAtEd At 30mA OR LESS).
1 Attach the required disc for
the job.
3 Ensure the workpiece is
secured.
5 Lower the sander polisher
disc onto the workpiece.
Note:
Do not apply excess
pressure, allow the tool to do
all the work.
2 Set the variable
speed dial to the
desired setting.
4 Hold the tool firmly,
press the lock-off
button and squeeze
the on/off trigger.
5
6
