To view the full range visit: www.ozito.com.au
To view the full range visit: www.ozito.com.au
Operation Of the Trio Driver
Only use driver/drill bits which can be securely fastened in the ¼” magnet-
ic bit holder (5). Before using the screwdriver check whether the screw-bit is
inserted correctly. Avoid over tightening screws, otherwise the screw head
maybe damaged or stripping of the threads may occur.
Screw Insertion/Removal
Insert the required driver bit into the head of the screw.
Insert the required driver bit into the ¼” Magnetic bit
holder (5). Hold the driver bit in line with the head of
the screw, otherwise the screw or screw head may be
damaged. Always keep constant pressure while
driving in the screw to avoid damage to the driver bit
or screw head.
Depress the On/off switch (11) (Fig.10) to start driving in the screw to avoid
damage to the driver bit or screw head may damaged. If the On/off
trigger switch (11) is not released immediately the high torque could also
damage the driver bit of the screwdriver.
Rotating Handle
The Trio Driver has two different handle configurations to assist you with
your job requirements.
To rotate the handle from the standard “L” shaped position, to the ‘inline’
position, press the rear rotating handle lock button (7) and rotate the
handle in an clockwise direction until it clicks into position. To return handle
to it’s original position, press the lock button and rotate the handle in an
anti-clockwise direction.
The Trio Driver in the ‘In Line’ position will help you reach the hard to get at
places, such as ceilings. The ‘L’ or pistol grip shape provides additional grip
for those jobs which may require more torque.
Battery Level Indicator
The Trio Driver is equipped with a LED battery level indicator (6) to assist
you to determine how charged your Trio Driver may currently be.
To check how much charge your Trio Driver has
simply press the button below the battery level
indicator (6) (Fig.14) and the LED lights will illuminate.
A red LED informs you that the Trio Driver required
charging, the orange LED indicates that the Trio driver
is in low in a low state of charge and may require
charging soon.
A green LED indicates that the Trio Driver is fully charged and ready to use.
LED Light
The Trio Driver has a built in LED light (13) to illuminate
dark areas (Fig.15).
Simply press the LED light On/Off button (12) on and
off as required. Turn off the LED light when not needed
to save battery life.
• Keep the ventilation vents of the tool clean at all times, if possible,
prevent foreign matter from entering the vents.
• After each use, blow air through the tool housing to ensure it is free from
all dust particles which may build up. Build up of dust particles may
cause the tool to overheat and fail.
• If the enclosure of the tool requires cleaning do not use solvents but a
moist soft cloth only. Never let any liquid get inside the tool; never
immerse any part of the tool into a liquid.
Note:
Ozito Industries will not be responsible for any damage or injuries
caused by the repair of the tool by an unauthorised person or by
mishandling of the tool.
Maintenance
Caring For The Environment
Power tools that are no longer usable should not be
disposed of with household waste but in an
environmentally friendly way. Please recycle where
facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and
raw materials. Reuse of recycled material decreases
pollution in the environment. Please recycle packaging
where facilities exist. Check with your local council
authority for recycling advice.
OZITO INDUSTRIES PTY LTD
AUSTRALIA (Head Office)
1-23 Letcon Drive, Bangholme, Victoria, Australia 3175
Telephone: 1800 069 486
Facsimile: + 61 3 9238 5588
Website: www.ozito.com.au
Email: [email protected]
Description of Symbols
V
~
mA
A
dc
Hz
W
n
o
/min
Volts
Alternating current
Milliamperes
Amperes
Direct current
Herts
Electrical Emissions Conformity (EMC)
Watts
No load speed
Revolutions or reciprocation per minute
Double insulated
Warning
Isolation transformer
Indoor use only
Polarity
Operation (cont.)
Fig.11
Fig
.12
Fig.13
Fig.14
Fig.15
Spare Parts
Right Angle Attachment
SPSDR003-23
Cutting Head Attachment SPSDR003-24
Charger Adaptor
SPSDR036-55
Fig.10
Contents
1 x Trio Driver SDR-003
1 x Cutting Head Attachment
1 x Right Angle Attachment
1 x Protective Rubber Nose Piece
2 x Driver Bit Accessories
1 x Charger
1 x Instruction Manual
Transformer Energy Rating (MEPS)
