ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
2. Plug charging adaptor into
power socket.
4. Place the Screwdriver on the
docking station for charging.
1 Bit Holder
2 Quick Connect Chuck
3 Torque Collar
4 LED Worklight
5 Charge Check Indicator
6 Charge Check Button
7 Handle Lock Button
8 On/off Trigger
9 Charging Socket on Driver
10 Forward/ Reverse Lever
CORDLESS SCREWDRIVER
KNOW YOUR PRODUCT
1. CHARGING
1. Remove charging adaptor from
the base of docking station.
3. Insert the charging jack into the
charging socket on the docking
station.
Charge Check LED Indicator
1. Depress the charge check button.
2. Observe which charge check LED illuminates for a reading on your
battery’s charge.
11 Docking Station
12 Docking Station Storage
Cover
13 Charging Adaptor
14 Charging Socket on Dock
15 Charging Jack
16 CRV Bits x 15
ACCESSORIES
SETUP & PREPARATION
To reduce the risk of electric shock, a residual current device
(rated 30mA or less) must be used.
Flat Battery
Low Charge
Full Charge
NOTE:
A RED LIGHT ON TOP OF THE SCREWDRIVER WILL
ILLUMINATE WHEN PROPERLY CONNECTED AND CHARGING.
