Adjusting The Extension Arms
1. Turn the fastening knob on
the frame counter-clockwise
to loosen it.
2. Pull the extension arm out to
the desired length.
Note:
The maximum extension length is reached when the arm
locking pin clicks into place. To shorten the extension arm again,
depress this pin and push the extension arm back into the frame.
3. Turn the fastening knob clockwise to tighten it and secure the
extension arm into place.
Adjusting The Roller Height
1. Turn the fastening knob on
the collar of the extension arm
counter-clockwise to loosen it.
2. Raise or lower the roller to the
desired height.
3. Turn the fastening knob clockwise to tighten it and secure the roller
into place.
Using The Material Support Shelves
The mitre saw stand features material support shelves which allow
repetitive cuts to be made quickly and accurately.
1. Adjust the height of the roller arm so that the lip of the material
support shelf is in line with the work surface of the mitre saw.
2. Adjust the extension arms to the desired cutting length.
3. Place the end of the
workpiece against the material
support shelf and commence
the cut.
SCMS-1621MS
STAND
2. ATTACHING A MITRE SAW
3. ADJUSTMENTS
OPERATION
Fastening The Mitre Saw
This unit comes with 4 x 35mm bolts and 4 x 60mm bolts. Either set
may be used to fasten the mitre saw.
1. Adjust the mounting bars to roughly the width of the mitre saw
base.
2. Place the mitre saw on the
mounting bars and line up the
holes in the mitre saw base
with the slots on the mounting
bars.
3. Feed a bolt through the
bottom of the mounting bar
then through the base of the
mitre saw.
4. Slide a washer and then a
spring washer onto the bolt
and fasten it with a hex nut.
5. Repeat steps 3 and 4 for the
other 3 holes on the mitre saw
base.
WARNING!
DURING OPERATION AND BEFORE
STARTING A NEW JOB, ENSURE THAT ALL SCREWS
AND NUTS ARE TIGHTENED CORRECTLY AND
SECURELY.
a.
b.
a.
b.
WARNING!
ONLY USE A MITRE SAW THAT HAS 4
FIXING HOLES (1 IN EACH CORNER OF THE BASE)
ON THIS STAND, AS OTHERWISE IT CANNOT BE
PROPERLY SECURED. FAILURE TO FOLLOW
THIS DIRECTION MAY RESULT IN DAMAGE TO
PROPERTY AND/OR PERSONAL INJURY.
