![background image](http://html.mh-extra.com/html/ozito/rtb-001/rtb-001_instruction-manual_1666494002.webp)
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Outfeed Fence
2 On/Off Switch
3 Switch Leg
4 Guard
5 Table Insert
6 Table
7 Infeed Fence
8 Mitre Gauge
9 Mitre Gauge Lock Knob
10 Leg
ROUTER TABLE
KNOW YOUR PRODUCT
1. ASSEMBLY
Attaching the legs.
1. With the table upside
down on a flat surface
and the logo closest to
you, place the switch
leg on the right hand
side. Secure to the table
using 4 socket screws,
spring and flat washers.
1. Align the fence over the channel openings in the table. Place the
longer of the 2 carriage bolts through the corresponding hole on
your left and secure using flat washer and large lock knob.
1. With the router table on its
legs, align the 2 screw holes
in the switch box with the
corresponding holes in the leg
with the cut out. Secure using
2 small Phillips head screws
(supplied).
2. Position the remaining
3 legs with the
corresponding holes
in the table top and
secure each leg using
4 socket screws,
spring and flat washer.
SETUP & PREPARATION
The router table must be fully assembled before use.
Note:
Ensure all off the screws are securely fastened.
Attaching Switch Box.
Attaching Fence.
2. Place the smaller carriage bolt
through the corresponding
hole on your right and secure
using flat washer and large
lock knob.