MAINTENANCE
DESCRIPTION OF SYMBOLS
TROUBLESHOOTING
• Keep the ventilation vents of the saw clean at all times, if possible, prevent
foreign matter from entering the vents.
• After each use, blow air through the saw housing to ensure it is free from all dust
particles which may build up. Build up of dust particles may cause the saw to
overheat and fail.
• If the enclosure of the saw requires cleaning, do not use solvents but a moist
soft cloth only. Never let any liquid get inside the saw; never immerse any part of
the saw into a liquid.
Carbon Brushes
When the carbon brushes wear out, the reciprocating
saw will spark and/or stop. Discontinue use as soon
as this happens. They should be replaced prior to
recommencing use of the reciprocating saw. Carbon
brushes are a wearing component of the reciprocating
saw therefore not covered under warranty. Continuing
to use the reciprocating saw when carbon brushes
need to be replaced may cause permanent damage to
the reciprocating saw. Carbon brushes will wear out after many uses but when the
carbon brushes need to be replaced, take the reciprocating saw to an electrician
or a power tool repairer for a quick and low cost replacement. Always replace both
carbon brushes at the same time.
Note: Ozito Industries will not be responsible for any damage or injuries
caused by the repair of the reciprocating saw by an unauthorised person or by
mishandling of the reciprocating saw.
Sparking visible through the housing air vents
A small amount of sparking may be visible through the housing vents.
This is normal and does not indicate a problem.
Excessive sparking visible through the housing
air vents and/or the saw failing to operate
May indicate the carbon brushes have worn out and need to be
replaced. Carbon brushes should only be replaced by a qualified electrician or
power tool repairer.
SPARE PARTS
V
Volts
Hz
Hertz
~
Alternating current
W
Watts
spm
Strokes per minute
Double insulated
Warning
n
o
No load speed
Read instruction manual
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse or Homebase store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: [email protected]
