![background image](http://html1.mh-extra.com/html/ozito/rou-5000u/rou-5000u_original-instructions-manual_1666930003.webp)
2. DUST EXTRACTION ADAPTOR
3. GUIDE FENCE & TEMPLATE GUIDE
1. Depress spindle lock button
and loosen collet nut.
Remove the collet nut and
collet completely.
1. Loosen screws on the end
of guide rods with hex key.
2. Remove the 2 fence locking knobs from the rear of the router.
The dust extraction adaptor allows you to connect a vacuum cleaner
or dust extractor to the router.
hold
4. Secure with the two dust extraction adaptor screws from the base
of the router.
3. Ensure you are inserting the adaptor from the rear of the router.
Align the front of the adaptor with the recess in the base. Tilt the
front lip of the adaptor down to clear the spindle and insert into
place.
5. Re-assemble the router and replace the router bit.
2. Line the guide rods up with
the holes in the guide fence.
Secure in place with the
fence screws.
3. Loosen guide fence locking
knobs.
5. Adjust the guide fence until it is the correct distance from the
router bit and the cut to be made. Tighten guide fence locking
knobs to fasten guide fence in place.
Adjust Distance
The guide fence is an effective aid when cutting in a straight line
when chamfering or grooving.
The template guide makes it possible for you to easily cut in the
shape of any template.
It must be fitted in conjunction with the
dust extraction adaptor.
1. Fit the template guide to
the bottom of the router.
2. Secure using the two dust
extraction adaptor screws.
4. Feed the guide fence rods
through the holes in the
router base.