1. Connect the tool to the mains power supply.
2. DUST BAG
3. ON/OFF SWITCH
2. To turn on, press the on/off switch to the “I” position.
3. To turn off, press the on/off switch to the “0” position.
2. To remove, pull
the dust bag away
from the extraction
port.
1. Push the dust
bag onto the dust
extraction port
aligning the locking
tab and rotate as
shown.
OPERATION
Install
The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.
1/3
3. Empty dust bag when it becomes
1
/
3
full for optimum dust
extraction.
CAUTION:
GUIDE THE CORD DURING SANDING TO
PREVENT IT BEING CAUGHT ON THE WORKPIECE,
OR OTHER OBJECTS.
Remove
Empty