![background image](http://html1.mh-extra.com/html/ozito/rda-048/rda-048_instruction-manual_1666323002.webp)
If you have any questions, call Ozito: (AUS) 1800 069 486 (NZ) 0508 069 486
These instructions are to be used as a guide only and are not intended
to replace the instruction manual provided with your tool. Always
read the instructions for full details relating to operation of your tool
RDA-048
INSTRUCTION MANUAL
RIVETS
Recommended rivet
sizes
suitable for use with the
RiveDrill.
Where:
qD:
rivet diameter
qM:
mandrel diameter
L:
mandrel length
Recommended rivet
materials
suitable for use with
the RiveDrill.
WARNING:
Using rivet sizes and materials not
shown in these tables may damage the RiveDrill and
will not be covered by the warranty.
Rivet
Mandrel
Table 1
Table 2
ATTACHING RIVEDRILL TO YOUR DRILL
Pull the external sleeve to
1.
the front of the RiveDrill,
exposing the drive shaft.
Insert drive shaft into drill
2.
chuck in the same manner
as a drill bit. Tighten chuck.
Pull the external sleeve
3.
back to cover the drive
shaft and chuck.