If you have any questions, call Ozito: (AUS) 1800 069 486 (NZ) 0508 069 486
These instructions are to be used as a guide only and are not intended
to replace the instruction manual provided with your tool. Always
read the instructions for full details relating to operation of your tool.
RDA-048
INSTRUCTION MANUAL
KNOW YOUR PRODUCT
DRILLS
To ensure proper performance of RiveDrill, a drill with sufficient torque should be used. We recommend a
minimum 18V cordless or 250W corded drill for this application.
AVAILABLE SPARE PARTS
SPRDA048-015
Jaws (x2)
SPRDA048-014
Nose Pieces (set of 3)
SPRDA048-012
Rotor Assembly
(Drive Shaft (3), Rotor (11),
Spring (4))
SELECTING A NOSE PIECE
3 nose pieces are provided with the RiveDrill to suit common rivet sizes:
3.2mm (1/8”), 4mm (5/32”), and 4.8mm (3/16”). It is important that the
correct size is selected for the rivets being used.
To change the nose pieces, unscrew it from the RiveDrill and then screw
in the suitable nose piece for the rivet size.
3.2mm
4.0mm
4.8mm
9
5
3
Circlip
1.
Washer
2.
Drive Shaft
3.
Spring
4.
External Sleeve
5.
Jaw Holder
6.
Nose
7.
Jaws
8.
Nose Piece
9.
Circlip
10.
Rotor
11.
