Power tools that are no longer usable should not be disposed of with
household waste but in an environmentally friendly way. Please recycle
where facilities exist. Check with your local council authority for
recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your local
council authority for recycling advice.
MAINTENANCE
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
TROUBLESHOOTING
spare parts can be ordered from the special Orders
desk at your local Bunnings Warehouse.
for further information, or any parts not listed here,
visit www.ozito.com.au or contact Ozito Customer
service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
• After each use, blow air through the tool housing to ensure it is free from all dust,
dirt, etc. Build up of dust, dirt particles may cause the tool to overheat and shorten
the life of the tool.
• If the housing of the light requires cleaning, do not use solvents but a moist soft cloth
or soft brush only.
• Never let any liquid get inside the tool, never immerse any part of the tool into liquid.
• When not in use, the light should be stored in a dry, frost free location not within the
reach of children.
WARNING!
AlWAys eNsURe The TOOl hAs
COmpleTely sTOpped ANd The BATTeRy Is
RemOved pRIOR TO ANy mAINTeNANCe.
led lights do not illuminate on charger
Check the charging adaptor is securely plugged into the wall out let.
Check the battery is firmly connected to the charging cradle.
Check that the charging jack is securely connected to the charging cradle.
The battery has a short run time
Ensure the battery is properly charged. It will take 4-5 charging cycles before the battery
reaches optimum charge and run time. On the initial charge, the battery requires 5 hours
of charging. Subsequent charging only requires 3-5 hours.
Note: Ozito Industries will not be responsible for any damage or injuries caused
by the repair of the worklight by an unauthorised person or by mishandling of the
worklight.
Warning
Read instruction manual
mA
Milliamperes
Recycle battery
Do not put in the rubbish
Polarity
Do not incinerate
Do not get battery wet
Thermal cut-out protection
Transformer Energy
Rating (MEPS)
Double insulated
Ah
Amp hour
Indoor use only
Lithium Ion battery
Do not use or store battery in
temperatures exceeding 50
º
C
Electrical Emissions
Conformity (EMC)
n
o
No load speed
V
Volts
Hz
Hertz
ac/~
Alternating current
Direct current
dc/
Do not expose to rain.
