background image

Power tools that are no longer usable should not be disposed of with 

household waste but in an environmentally friendly way. Please recycle 

where facilities exist. Check with your local council authority for 

recycling advice.

Recycling packaging reduces the need for landfill and raw materials. 

Reuse of recycled material decreases pollution in the environment. 

Please recycle packaging where facilities exist. Check with your local 

council authority for recycling advice.

MAINTENANCE

DESCRIPTION OF SYMBOLS

CARING FOR THE ENVIRONMENT

TROUBLESHOOTING

Spare parts can be ordered from the Special Orders 

Desk at your local Bunnings Warehouse. 

For further information, or any parts not listed here, 
visit www.ozito.com.au or contact Ozito Customer 

Service: 
Australia 1800 069 486 

New Zealand 0508 069 486

 

E-mail: [email protected]

SPARE PARTS

•  After each use, blow air through the tool housing to ensure it is free from all dust, 

dirt, etc. Build up of dust, dirt particles may cause the tool to overheat and shorten 

the life of the tool. 

•  If the housing of the fan requires cleaning, do not use solvents but a moist soft cloth 

or soft brush only. 

•  Never let any liquid get inside the tool, never immerse any part of the tool into liquid.
•  When not in use, the fan should be stored in a dry, frost free location not within the 

reach of children.

WARNING!

 

ALWAYS ENSURE THE TOOL HAS 

COmPLETELY STOPPED AND THE BATTERY IS 
REmOVED PRIOR TO ANY mAINTENANCE.

LED lights do not illuminate on charger

Check the charging adaptor is securely plugged into the wall out let.
Check the battery is firmly connected to the charging cradle. 
Check that the charging jack is securely connected to the charging cradle.

The battery has a short run time

Ensure the battery is properly charged. It will take 4-5 charging cycles before the battery 
reaches optimum charge and run time. On the initial charge, the battery requires 5 hours 
of charging. Subsequent charging only requires 3-5 hours.

The fan did not shut-off after the delay time

The correct delay setting may not have been selected. Ensure the light that corresponds 
to the desired time is illuminated when selecting an automatic shut-off time.

Note: Ozito Industries will not be responsible for any damage or injuries caused by 

the repair of the fan by an unauthorised person or by mishandling of the fan.

Warning 

Read instruction manual

      

 

mA

Milliamperes 

 

 

Recycle battery 

   

Do not put in the rubbish

Polarity

Do not incinerate   

 

 

Do not get battery wet

Thermal cut-out protection

Transformer Energy

Rating (MEPS)

Double insulated 

Ah 

   

Amp hour

Indoor use only

Lithium Ion battery

Do not use or store battery in 

temperatures exceeding 50

º

C

   

Regulatory Compliance 

Mark (RCM)

     

n

o      

No load speed

  

V

 

    

Volts

 

 

 

            

Hz

      

Hertz

ac/~

      

Alternating current 

            

      

  

    

Direct current

 

dc/

Do not expose to rain.

Do not touch fan blades   

 

Do not operate near long hair

Reviews: