Fastener Selection
Accessories to suit this Staple Nail Gun can be purchased from Bunnings
Warehouse.
Staple Measurements
This tool accepts staples with the measurements below:
Nail Measurements
This tool accepts nails with the measurements below:
Loading Staples
This staple nailer only accepts Narrow Crown 18 gauge 16-22mm staples.
Other types of staples, including paper staples, will jam the unit. For best
results, load a full row of staples before use.
1. Press the cartridge latch down
and pull the magazine slider out
of the tool.
3. Insert a row of staples into the
opening behind the nose piece.
Be sure to align them to
the upper left corner of
the cartridge.
Note:
Rows of more than 90
staples do not fit in the
staple nail gun.
4. Push the magazine slider back
into the unit until it clips into
place.
2. NAIL/STAPLE SELECTION
3. LOADING THE CARTRIDGE
(1)
(2)
WARNING!
ENSURE THE BATTERY IS REMOVED
BEFORE PERFORMING ANY OF THE FOLLOWING
TASKS.
Fastener
Common Applications
Staples
Insulation, Upholstery, Weather Stripping, Wall
Decorations, Crafts, Covering Cornices, Webbing,
Light Fabrics, Carpeting, Wire Mesh, Plastic or Canvas
Coverings, Roofing Paper, Felt.
Nails
Trim Moulding, Panelling, Picture Frames, Model Work,
Any Finish Nailing Application.
15-32MM 18 GAUGE
C1 BRAD
NAILS
2mm
1mm
32mm
15mm
25mm
20mm
16-22MM 18 GAUGE
NARROW CROWN
STAPLES
16mm
22mm
20mm
18mm
5.7mm
1mm
15-32MM 18 GAUGE
C1 BRAD
NAILS
2mm
1mm
32mm
15mm
25mm
20mm
16-22MM 18 GAUGE
NARROW CROWN
STAPLES
16mm
22mm
20mm
18mm
5.7mm
1mm
