Ozito PXLMS-335 Instruction Manual Download Page 4

3.  MOWING

OPERATION

1.   Press and hold the lock-off 

button.

3.   Release the start/stop lever 

to stop the mower.

To prevent accidental start up, the mower is fitted with a dual action switch.

2.   Pull the start/stop lever 

towards the handle to start 

the mower and then release 

the lock-off button.

Switching On and Off

PXLMS-335

•   While using your lawn mower always wear substantial closed, heavy 

footwear and long trousers.

•   Make sure the lawn is clear of sticks, stones, wire and debris; they could 

be thrown by the blade.

•   Before using the lawn mower and after any impact, check for signs of 

wear or damage and repair as necessary.

•   Replace a worn or damaged blade together with the blade bolt to 

preserve balance.

IMPORTANT! 

DO NOT MOW IN POOR VISIBILITY 

CONDITIONS, IN THE RAIN OR WHEN GRASS IS 
WET.

 Start mowing the edge of the 

lawn and work along making 

sure to overlap each pass by a 

few centimetres.

When mowing long grass be sure to not overload the motor.  First cut with the 

highest cutting 

height and then 

to the desired 

height. This will 

help reduce the 

load.

Lawn Mowing Tips 

1.   Lift open the battery cover.

3.   Insert the safety key. 

(If the mower is not going to be used 

immediately, do not insert the safety 

key.)

2.   Slide two batteries of the same 

capacity and same charge state 

into the mower aligning the ribs 

so that they click into place.

4.   Close the battery cover.

Inserting the Batteries into the Mower

Only use 2 batteries with the same capacity. For best performance use 3.0Ah batteries 
and above. Always use 2 batteries with the same charge state with the mower.

1.   Lift open the battery cover. Press 

the battery release tab and 

remove the battery.

2.   Close the battery cover.

Removing the Batteries from the Mower

Summary of Contents for PXLMS-335











Reviews: