background image

Battery Charge Indicator

The purchased battery is equipped with 

a battery charge indicator to show the 

state of the battery charge.
Press the charge indicator button and 

look to see which LED lights.

Battery requires 

immediate charging

Low state of charge, requires charging soon.

Mid state of charge

Full state of charge.

Note:

 The battery needs to be removed from the tool to check the state of 

charge. 

1    Connect the charger into a mains power outlet.

4  The charger LED will illuminate red signifying that the battery is 

charging.

3   With the battery sitting on a flat 

surface, align the raised ribs on 

the battery with the recess in the 

charger and slide onto the battery 

ensuring a firm connection.

2   The charger LED will flash 

green showing power is being 

supplied to the charger.

5  When removing the charger from 

the battery, first press the battery 

release tab, then slide the charger 

from its position.

Charging your lithium ion battery - Eco Charger

Charger LED Indicator 

LED Indicator 

Situation

GREEN (Flashing) 

Stand By (no battery pack is inserted) 

RED (Illuminated)

Battery is charging (low charge)

GREEN (Illuminated)

Battery is charged and ready for use

RED (Flashing)

Battery or Charger fault

RED & GREEN (Flashing)

Battery pack is too hot or too cold (remove 

battery from charger and store at room 

temperature 20ºC. Insert battery again when at 

correct charging temperature). If this happens 

again, the battery is defective and needs to be 

replaced.

2.  BATTERY & CHARGING 

(sold separately)

The purchased battery will be shipped in a low charge condition, and requires charging 
prior to use. Allow several cycles of charging and discharging (through use of the tool) 
for the battery to reach its optimum performance / runtime.

CAUTION:

 

THE CHARGER FOR THIS PRODUCT SHOULD 

BE PROTECTED BY A RESIDUAL CURRENT DEVICE 
(RATED AT 30MA OR LESS).

1    Connect the charger into a mains power outlet.

4  The charger LED will illuminate 

red signifying that the battery 

is charging.

3   With the charger sitting on a 

flat surface, align the raised 

ribs on the battery with the 

recess in the charger and slide 

onto the charger ensuring a firm 

connection.

2   The charger LED will flash 

green showing power is being 

supplied to the charger.

5  The charger LED will illuminate 

green once the battery is 

charged.

Charging your lithium ion battery - Fast Charger

Charger LED Indicator 

LED Indicator 

Situation

GREEN (Flashing) 

Stand By (no battery pack is inserted) 

RED (Flashing)

Battery is charging (low charge)

RED (Illuminated)

Battery is charging (mid charge)

GREEN (Illuminated)

Battery is 85% - 100% Charged and ready for use

BOTH(Illuminated)

Battery pack is too hot or too cold (charging 

will begin automatically when battery reaches 

correct charging temperature).

BOTH (Flashing)

Defective battery. Never charge a defective 

battery pack!
Remove battery pack from charger.

Summary of Contents for PXJSS-600U











Reviews: