![background image](http://html1.mh-extra.com/html/ozito/pxhfs-1218/pxhfs-1218_instruction-manual_1666339002.webp)
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
12V DC
FAN SPEED
INPUT
Attaching To A Wall
The mounting plate on the fan allows you to hang the unit on a wall to clear
up valuable bench space.
Use the appropriate screw type for the surface you are attaching the
bracket to. The recommended screw size is 6mm in diameter and at least
50mm long.
1. Fasten a screw halfway into the
wall at the desired height.
2. Place the groove of the mounting
plate on the screw and fasten the
srew fully into the wall.
3. For extra security, place another
screw through the hole in the
mounting plate.
Using The Hanging Hook
Where appropriate, the fan can also
be hung up with the supplied hook.
Note:
Ensure the hook is placed
securely around the mounting bar.
1. Fan Housing
2. Carry Handle
3. Speed Control Switch
4. On/Off Switch
5. Battery Seating
6. 12V DC Cable Port
7. Hanging Hook
8. Wall Mounting Plate
9. Frame
10. Angle Adjustment Knob
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
HYBRID FAN
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. INSTALLING THE FAN
SETUP & PREPARATION
12V DC
FAN SPEED
INPUT
1
2
10
9
7
8
6
3
5
4
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.