KNOW YOUR PRODUCT
SETUP & PREPARATION
1. ASSEMBLY
CORDLESS IMPACT DRIVER (PXIDS-300U)
1
2
3
4
5
1 Drive Bit Retaining Ring
2 Tri-Beam LED Light
3 Variable Speed Trigger
4 Belt Hook
5 Forward/ Reverse Lever
Inserting & Removing the Battery
1 Align the ribs of the battery with
the recess at the base of the
driver hanlde and push in until it
clicks into place.
2 To remove, press and
hold the battery release
tab and then slide out.
1 Pull the drive retaining ring
forward.
3 Release the drive bit retaining
ring then pull on the bit to ensure
it is firmly in place.
4 To remove, pull the drive
retaining ring forward & remove
the driving bit.
2 Insert the hex shank of the
appropriate (1/4”) driver bit.
WARNING!
ENSURE THE TOOL IS SWITCHED OFF AND
THE BATTERY IS REMOVED BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
CAUTION!
DO NOT HANDLE ACCESSORIES WITHOUT
GLOVES AS THEY ARE SHARP AND CAN BECOME HOT
AFTER USE, POTENTIALLY CAUSING PERSONAL INJURY.
b
a
b
a
Inserting & Removing Accessories
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
